MERCEDES-BENZ Atego Thermal Insulation Blanket Kit

MERCEDES-BENZ Atego Exhaust Blankets. Suits 1630.

This kit includes:

• 1630-M1: Mercedes-Benz Atego manifold LHS
• 1630-M2: Mercedes-Benz Atego manifold RHS
• 1630-EGRA: Mercedes-Benz Atego EGR bend
• 1630-EGRB: Mercedes-Benz Atego EGR section 2
• 1630-T: Mercedes-Benz Atego turbo
• 1630-A: Mercedes-Benz Atego dump pipe
• 1630-B: Mercedes-Benz Atego clamp 1
• 1630-C: Mercedes-Benz Atego bend 1
• 1630-D: Mercedes-Benz Atego clamp 2
• 1630-E: Mercedes-Benz Atego bend 2
• 1630-F: Mercedes-Benz Atego bend 3
• 1630-G: Mercedes-Benz Atego flex bellow
• 1630-H: Mercedes-Benz Atego bend 4
• 1630-I: Mercedes-Benz Atego clamp 3
• 1630-J: Mercedes-Benz Atego bend 5
• 1630-K: Mercedes-Benz Atego bend 6
• 1630-L: Mercedes-Benz Atego bend 7
• 1630-N: Mercedes-Benz Atego tailpipe exit

FAQs
What are Thermal Insulation Blankets?
Thermal Insulation Blankets (Lagging) protect engine bays from fires spreading through the machine and putting operators in harm. Our blankets tend to redirect fires caused by mechanical issues away from the engine bay. This allows operators time to realise that the machine omitting smoke and gives them time to turn the machine off for mechanical inspection before any serious damage occurs.

The blankets suffocate the fire inside the engine bay, without these blankets oil or fuel leaks will ignite and move rapidly at very high temperatures with the assistance of internal machine fans. This will cause irreparable machine damage and put operators at huge risk.

What are Thermal Insulation Blankets made of?
Our MineBase blankets are up of three key parts:
The Hot Face – Non-permeable aluminium material prevents absorption of flammable liquids that would otherwise become a potential point of combustion.
Insulation – The needle mat layer is made from silica glass needle felt which not only has better thermal properties than the commonly used fibreglass needle mat; it is also a lot less irritating to the skin, making it easier to work with when fitting.
Cold Face – The outer layer is known as the “Cold Face”, which consists of a fibreglass cloth that can be coated in a variety of different materials such as Silicone, Aluminium or Teflon.

CLICK HERE to read more about our MineBase Thermal Insulation Blankets

DISCLAIMER: Some models may have different exhaust configurations. Please contact us if you wish to guarantee compatibility with your equipment!